FirstBank Jobs

Summary You will serve as a Supervisory General Engineer/Architect of NAVAL FACILITIES ENG COMMAND ATLANTIC. Above salary does not include locality. Locality adjustment will be determined by duty station location once a selection has been made. This position is a 100% TDY position to Camp Lemonnier, Djibouti, Africa. This is a full-time temporary assignment not to exceed 1 year. Responsibilities You will evaluate engineering and architectural designs, drawings, specifications, and supporting documents to determine feasibility, compatibility with other work, and effectiveness in meeting requirements. You will implement architecture and engineering design criteria for facilities under construction. You will oversee the construction and engineering design of projects to ensure compliance with established architectural and engineering standards. You will perform quality assurance of contract work to verify compliance with contract requirements for design and construction. You will assign work to subordinates based on priorities, difficulty of assignments, or the capabilities of employees. Requirements Conditions of Employment Qualifications This position has a Selective Placement Factor that will be used to screen out ineligible candidates. The Selective Placement Factor is: You must currently be a licensed Professional Engineer (PE) if applying for the 0801 series. You must be a Registered Architect (RA) if applying for the 0808 series. Your license or registration must be held in a State, the District of Columbia, the Commonwealth of Puerto Rico, or a territory of the United States. NOTE: You must submit a copy of your current license or registration with your application package. In addition to the Basic Requirements for this position, your resume must demonstrate at least one year of experience equivalent to the GS-13 level in the Federal Service by performing the following duties: 1) Managing or assisting in the management of a diverse team of architects and engineers professionals and technicians engaged in the execution of facilities projects, adhering to cost, quality, and schedule requirements; 2) Providing technical consultant-level support for planning, design, construction, and environmental programs associated with complex industrial and operational facilities and equipment; 3) Identifying resource requirements for projects (manpower and dollars) and recommends appropriate changes to solve complicated technical, budget or resource issues; 4) Preparing and presenting high level reports/briefs on project status, including recommendations for solutions to problems involving project scope, funding, etc. NOTE: THIS INFORMATION MUST BE SUPPORTED IN YOUR RESUME TO BE CONSIDERED FOR THE POSITION. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. ADDITIONAL INFORMATION: Work Environment: Camp Lemonnier, Djibouti, Africa is located in a harsh environmental setting with adverse weather conditions for many months of the year (excessive heat, humidity, and rain) and working in areas populated by poisonous snakes, plants, and/or insects, and contagious diseases and poor air quality, chemical handling areas, and damp and unheated spaces. The work may require extensive work shifts of 12-16 hours a day and more than a 5 day workweek. Generally, indoor work location has power, water, heating and air conditioning, although outages should be expected. The incumbent will be required to live on the camp, where living quarters are a container living unit (CLU), which may be very cramped with the requirement to share bathroom facilities. Initial living quarters may be a tent. Fatigue may occur from long work hours and uncomfortable living conditions. The position may be required to provide immediate contingency support requiring a physical and immunizations deemed necessary for the environment in which this support is provided. Incumbent is entitled to 25% Post Differential pay. Potential benefits for working in Djibouti: Ability to gain international work experience. Professional development by working in an area at the forefront of construction and community growth. High potential for overtime pay. Local Market Supplement (based on parent command location) Imminent Danger Pay - $225/month (first 42 days) Post Differential Allowance - currently 25% of base pay (beginning day 43+) Education For the 0801 series: Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: A. Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR B. Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR C. Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.ORD. Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)ORE. Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. For the 0808 series: Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: A. You have a bachelor's or higher degree in architecture. OR B. You have a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR C. You have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. Your curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but you have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note - In the absence of college courses, 5 years of such experience is required). Additional Information This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. Relocation expenses are NOT authorized. PCS expenses are NOT authorized. Recruitment incentives are NOT authorized. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/ Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPL. A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.